Motor XeRun V10 21.5T G3 i gruppen Alla produkter / Radiostyrt & Drönare / Tillbehör / Bilar Tillbehör / Motorer / Elmotorer / Hobbywing / Borstlöst hos Hobbex (815199)

Motor XeRun V10 21.5T G3

  • Hobbywing XeRun V10 G3-21.5T

    It’s a motor specially designed for high-level racing. The RMP of G3 Stock motor is significantly improved, the KV & torque are improved by 16% and 4% respectively, compared with the V10 G2 Stock motor.

    • Lightweight. The G3 Modified & Stock motors only weigh 161g & 132g respectively, the weights are reduced by 11% & 21% when comparing with the V10 G2 motors.
    • The built-in high precision Hall sensor combined with the high precision and balanced rotor guarantee outstanding linearity of the motor. 
    • The mechanical timing can be adjusted finely and smoothly; the skid-proof lines on the rear end plate of the motor guarantee stability of the timing after adjustment. For G3 Stock motors (10.5T~25.5T), the timing is adjustable from 30 degrees to 60 degrees; for Modified motors (3.5T~8.5T), the timing is adjustable from 20 degrees to 50 degrees.
    • The motor case is designed to be easy to dismantle for maintenance purposes and for the replacement of common wearing parts. 
    • The special shell design which makes the stator core expose to the air maximizes cooling. Big holes on the end plates of 10.5T~21.5T motors further help reduce heat; small holes on the end plates of 5.5T~8.5T motors effectively keep sand or dirt from getting inside and damaging the motor(s).
    • The use of high-performance stator core, heat ( 200°C) - resistant wire, heat (200°C) - resistant rotor with strong structure, imported high precision and high strength bearings, and copper solder tabs with super current endurance guarantees outstanding performance and super durability.
    • Asymmetric Bearings: By comparison (with the V10 G2 motor), for improving the load-carrying capacity, the size of the front bearing of the G3 motor is increased by 26% ; while for lower resistance, the size of the rear bearing is reduced by 6%. The asymmetric bearing design will make the motor running more stable and smooth.
    • It’s compliant with IFMAR, ROAR, EFRA, BRCA rules, and certificated by RoHS, CE, FCC and etc.

    21.5T Specs: 
    • Application: 1/10 Stock Class On-Road Racing & Rock Crawling
    • Type: Sensored Brushless
    • Poles: 2
    • KV Rating: 2250
    • LiPo: 2-3S
    • No Load Current: 2.8A
    • Max Power Output: 118W
    • Amp at max power: 32A
    • OD: 35.9 mm
    • Length: 50.5 mm
    • Shaft dia: 3.17 mm
    • Shaft length: 14 mm
    • Weight: 135 g
    • Std rotor: 7.3-12.5U
    • Timing: 30-60° (Adjustable)
  • Type: Sensored Brushless
  • KV Rating: 2250
  • LiPo: 2-3S


Gå till vanliga versionen »
Vi använder cookies. Besöker du vår websida så godkänner du detta, läs hela vår integritetspolicy härOK